Tuesday, August 20, 2013

How to install Installing Digimaster 3 Tool

This section will show you how to install software of  DigiMaster 3 as well as how to connect it with your PC
1.Installing D3 Tool
Setp 1: Double-click the installation files in the CD.
Step 2: Choose the route of Installation

 Step 3: Open the software interface as below after installation

2.Connect the DigiMaster III with PC and internet
Step 1: Connect the D3 USB with PC. Click "Cancel" after the window bombed as below.
Step 2: Click "OK" to close the bombed warning dialog.
Step 3: The below window will appear after successful connecting with device. 
Step 4; Just reconnect the USB cable if the USB connecting is cut showed as below window

Notice:Insert the connector of  LAN cable into RJ45 LAN connector of D3 to make online update.

3.Remote Assistance
Our engineers will provide you on-line technology support via internet when you choose long-distance
assistance function.

Step 1: Please contact the Sales from my company to obtain an IP before the Remote Assistance. Then connect your D3 with internet.
Step 2: Open D3 Tool software to enter"Remote Assistance", then choose "Require Remote Assistance".
Step 3: Input the obtained IP and click "OK" in the bombed window

For more infomation about this Mileage Correction tool,please visit obd2works.com

No comments:

Post a Comment