Tuesday, December 16, 2014

Autocom/Delphi DS150E 2014.02 Diagnostic Tools

Version: 2014.02
We get the latest 2014.02 software and keygen from factory,firmware 1410.
Notice when install 2014.02
TURN OFF your internet connection!
shut down antivirus software!
1,copy "Delphi Cars 2014.R2" or "Delphi Trucks 2014.R2" to your computer.
2,run main.exe in "Delphi Cars 2014.R2" to activate(if you want to install truck ,
please run main.exe in "Delphi Trucks 2014.R2")
- click start
- click yes to save FileActivation on desk
- use 2014.2 keygen on cd to active FileActivation on desk
- click start again
- click no to open the FileActivation file actived
- wait for install complete,enjoy!
note:
1,if your computer first install ds150e software,you must install usb driver(main unit
link to computer to install).usb driver is in "ds150e 2014.2\Delphi Cars 2014.R2\Driver"
2,if you can't run main.exe.please install dotnetfx35_SP1.exe
3,if your main unit firmware is old, you must link main unit to car then updata firmware!
Delphi DS150 Functions:

1.Read & Erase Fault Codes & SLR All Systems(Petrol & Diesel Engine Management, ABS, Instrument panel, Climate control, Gearbox, Immobiliser, SRS, Multifunction (Central Body, Central Locking, Convenience Systems, Chassis, Infotainment, Lights, Navigation, Seats, TPMS etc-Vehicle Specific) ),
2.Look at Live Data, graphing and saving of live data
3.Component Activation
4.ECU Coding / Parameter Adjustments / Component Configuration (initialization of new components, particulate filter regeneration, Diesel Injector coding, TPMS etc)
5.Intelligent System Scan – complete scan of all ECU / ECM’s on vehicle platform, configurable by system
6. Full Vehicle Information tree – allowing vehicle specific check of OBD functionality without being connected to a vehicle-Customer reporting system-Direct Linking to Delphi Technical Data
7. Service Light Reset and Service Interval Reset, including ‘BMW Condition Based Service’ reset and Fiat Stilo, VAG.
Audi A6, A8 / VW Passat, – Electronic Handbrake, Piston reset for before and after brake service.
Mercedes E Class (211/230) De-activation and Activation of SBC (brake-by-wire) brake system, so that brakes can be serviced.
Peugeot Additive Tank Reset and Regeneration of Particle Emission Filters
Renault Laguna II, Espace IV, Velsatis, Peugeot 607, 807 and Citroen C5 & C8 - Tyre
click the link to buy Delphi ds150e with bluetooth
click the link to buy Delphi ds150e without bluetooth
our skype: obd2works
email: obd2works@gmail.com
And we have a vedio about how to install autocom/delphi ds150e 2014.02 software,you can visit the link:
https://delphids150e.wordpress.com/2014/12/16/delphi-ds150eautocom-2014-02-firmware-1410-installation-vedio/
 


Tuesday, October 7, 2014

Volkswagen Magotan / CC smart key matching method

Now many Volkswagen Audi cars have been upgrading to the fourth, the fifth generation of the anti-theft system, if we still do not know how such a model, is really very outdated thing.Now i'll share how to match key with Volkswagen Magotan / CC .

Anti-theft chip models distinguished:
Magotan smart key can be divided into full-smart 46 and semi-intelligent 48 keys, all intelligence is using 46 chips, semi-intelligent is 48 chips. Before we do match, you can measure what it is what type of chip used. Key to the whole case Magotan lost, you can observe whether the ignition switch is a false key, how is a fake key that this car is 46 chips, if not a false keys on the use of 48 chips. All intelligent key, as long as the key with me, you can start the car models, while the semi-intelligent must have the smart card into the slot to start.
Prices in remote, semi-intelligent 48-chip intelligent expensive than the whole, but 48 in the match when the chip is locked out once, you can easily replace ordinary 48 chips continue to be available. But how is 46 chips once locked away, no unlocking, the entire smart card will be scrapped. In fact, Magotan and CC are of the same class of models, smart card practices are the same, but do Magotan CC key risk than higher.
Match before the preparation:
Must be removed under the front passenger glove compartment on the back of a cozy computer, win, remove the glove box will be able to see it. Comfortable open computer case, there will be a 95320 chip, with the XP program can read octagonal or other universal programmer reads the data stored well. Save time must be saved as BIN format, because A Fudi only recognizes BIN file format, or to the next operation when an error occurs. After the data is saved well, the 95,320 yards Replace comfortable computer chip, replace the vehicle. As shown below:


Matching process: (Now with 12 years ago, 48 chips for example)
A read password and some memory data
A Fudi good links with the vehicle, the original car key into the ignition switch light, light up the instrument, do not start the vehicle. Select A Fudi plug, Magotan / CC options, with the original car key to open the ignition switch, choose the key type. Click on "automatic login code + partial memory data" This process takes about fifteen minutes to read. After reading out a successful, will prompt us to save memory data files. To save memory data is good, and so will be used to match behind the operation.
2, loaded comfortable computer EEPROM data (95320)
Click "Load comfortable computer EEPROM data (95320)", will pop up dialog box that prompts to load the file, we choose just read out by a programmer to load data 95320. When loading the 95320's data, the user interface will appear upper right corner of the original key data, key 1 and key data 2. If there is no key data appear, indicating that the previous steps have been a problem, it is recommended not to do down.
3, generate dealer keys
Select the second item, "reads part of the memory data by means of the first step in generating dealer key", click on "Load Data read the first step." When clicked, a prompt will pop up, the first step for us to load memory data read out. We choose just spent fifteen minutes that data read out. Click Open. After clicking Open, we put the key into the 阿福迪 new coil, put away the key, click on the "Generate dealer key." Will be prompted to "Please programming new keys into the coil, after a good point to determine stability." Then there will be another prompt "Generate Key Distribution successful, the use of key learning function keys can the car, record seven-byte security code: XX XX XX XX XX XX XX". We must make the 7-byte record, a pen or shot record is good, click OK.
4, learn key
If the original has a key now is to increase one, we choose the key number is two, to learn two keys. Then click on the learning key, the dialog box will pop up, "and click OK to start the match: The dealer key into the ignition light, and rotate to the instrument panel lit, for the key spacing is less than five seconds." Click OK, this time, will be displayed on the instrument 0-2 to start a match. It turned out that the key to the ignition switch to the exit, turn on lights and then insert the instrument, the instrument will show 1-2, and then passed on out, insert the new key is lit another instrument will display 2-2. Then passed out and insert just the first key lighting instruments, this time, the meter will display the number of kilometers, said the key match is completed.


5, remote control match
When matching the key is completed, but also for remote match. Select A Fudi 46 main channels, into the 46, just click match, select forward as channel number 01, directly point test, save, and then press the remote button.

46 chip matching difference:
The difference in the third step, select "With the car keys generate dealer keys" click "Generate dealer key" prompt "Please put a can of car keys into programmer" This time, we the original car keys from the ignition the switch down, put 阿福迪 coils, click OK. At this time, the user interface will appear fake crash state one minute or so, do not control, continue to wait, do not quit, like, then follow the prompts to do down after one minute.
Note:
12 years later, Magotan, regardless of the chip is 46 or 48, have chosen "With the car keys generate dealer keys" to do. In doing smart key match Magotan 46, when a new key for another car also got out of the car interior try to turn off all equipment generates radio wave interference, such as electronic dog, wireless transmitter of MP3. And 12 years ago, Magotan, whether 46 or 48 chips, we can use E Fudi match. 12 years after the Magotan 48 chips, you need to have five generations of the coil support to match.
To buy car key programmer,please visit the link:
http://www.obd2works.com/car-key-programmer-c-16.html

Wednesday, September 24, 2014

September new product for sale include VW AUDI A3 A4 A6 and BENZ


when see the picture you may be know what's that,yeah it is VDO LCD Display for VW AUDI A3 A4 A6,the VW AUDI A3 A4 A6 VDO lcd display is very cheap, only $45.99.Test for all Audi A3 VDO, AUDI A4 VDO, Audi A6 VDO, Volkswagen Golf, Volkswagen Passat VDO, Seat VDO.The LCD display must be connected to the circuit with soldering paste, and the driver SED1560TOB must be connected to the mother board.
Now,let's see the next product on our shop obd2works.com :BENZ SBC TOOL W211/R230 ABS/SBC TOOL

W211/R230 ABS/SBC TOOL (Repair Code C249F) for Mercedes Ben z cars have W211 and R230 with ABS SBC system , if using DAS test
the instruction as follows:
TIPS: CODE C249F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT)
The above tips that show internal fault of control unit, you have to replace the SBC control module and using W211/R230 TOOL that can be easily repaired without replace the new control module.
For Mercedes Ben z's Safety Precautions had stated that before attempting to repair the brake system on its models W211 (E Class) and R230 (SL Class), the Sensotronic Brake Control (SBC) system must be deactivated first using its STAR-DIAGNOSIS tester.
Deactivation of the SBC system is absolutely necessary before carrying out any maintenance work onthe brakes like changing of pads, discs and fluids because the system is under a pressure of 140 bars. Mechanics who perform brake services on these car models must have the proper tools to avoid the risk of injuries to themselves and damage to the brake system.
Until the introduction of this inexpensive, convenient, light, safe and easy to use SBC tool is another alternative to the STAR-DIAGNOSIS tester when working on SBC system. It can perform the tasks equally well which is efficient and safety.
After the repair had done, the SBC system can be activated and restore back its pressure. The memory is erased automatically.
- Quick, easy operations with LED indications.
- Safe to use
- Power ON when plugged into vehicle's OBDII diagnostic connector.
- Light, compact and very convenient.
- Stand alone unit.
This BENZ SBC tool works on W211 (E-Class) and R230 (SL-Class) with SBC systems. It is ideally suited for:
- Brake centers
- Independent for Mercedes Ben z workshops
- Tire Service centers
- Service garages
- Quick service centers
- For Mercedes Ben z Specialist centers
- Automotive Repair Workshops
SBC TOOL Support Type:
BOSCH NR: 0 265 960 012
BOSCH NR: 0 265 960 013
BOSCH NR: 0 265 960 015
BOSCH NR: 0 265 960 018
BOSCH NR: 0 265 960 019
BOSCH NR: 0 265 960 020
BOSCH NR: 0 265 960 023
BOSCH NR: 0 265 960 025
BOSCH NR: 0 265 960 028
SBC TOOL Configuration:
1. Host: 1PC
2. OBD-II connector: 1PC
For more diagnostic tool,please visit our shop : www.obd2works.com if you have any question,please contact us ,my skype: obd2works ,email: obd2works@gmail.com

Sunday, September 21, 2014

Smoke Automotive Leak Locator ALL-100

Smoke Automotive Leak Locator ALL-100 is an innovative product that provide safe and convenient method to check leaks in automotive systems. Its so far the fastest way of detecting & locating the leak position of all pipe system in an vehicle at an affordable price, every garage and workshop will need one.
The Smoke Automotive Leak Locator is a multi purpose tool essential for EVAP system, but also applicable for: EGR valves, Gaskets & Fittings, Hoses, Worn Throttle shafts,Break Boosters, Catalytic Converters, Oil Leaks, Lamp Housings, manifolds and more....
LED time indicator, Adjustable air flow and 1 ~ 20 minutes adjustable operating time
Adjustable timer and air flow to perform leak test ondifferent system that requires different flow amount.
Inbuilt air compressor
Performing leak test with no air compressor, which may
not be available for every workshop.

Various fittings
For different application needs
Note:
In considering the complexity of chemical exportatation, in the package there's no mineral oil included, user could buy mineral oil at drug store or
simply use a bottle of mineral oil based baby oil.
Professionel:
Easy to Operate
Fast in helping locate the leak
Multi-functional
Adjustable LED function time control
Adjustable flow control
Inbuild air compressor
Stable output pressure
Best mate for automotive scanner
Time saving features:
Help locate the leak position on all vehicle systems in about 5 minutes
Flexible:
With inbuild air compressor, and power supplied by 12Volt vehicle battery, its the best tool for leak locating regardless of the working condition.
Affordable:
Unbeatable price / performance ratio
Designed for long time use
Target customer:
Car manufacturer workshops, Independent Workshop or tire service shop, garages etc. where Professional, reliable and affordable equipment is needed.
ALL-100,the Smoke Automotive Leak Locator is a handy new generation of automotive system leak locator.ALL-100 use Mineral Oil to generate smoke. the oil is possible to get at drug store, or supermarket(Mineral Oil based baby Oil) , a 30 ML refill will be enough for test for 40 times( varies, depend on how long the user operate the equipment for each test.)ALL-100 is a one-time invest for a workshop or garage,but will help so much in work.
To buy the Smoke Automotive Leak Locator ALL-100,please visit our shop : www.obd2works.com

Friday, September 19, 2014

3 Easy DIY Steps To Detailing A Car

For many drivers, a car is their pride and joy. Their car isn’t just a primary form of transportation; it’s a status symbol and a representation of the driver. As such, every vehicle needs to be kept clean and presentable.

The easiest way to keep your car looking shiny and new is to regularly perform detailing services. The process of detailing your car means returning its condition to as close to brand new as possible.

Luckily, there are 3 easy DIY car detailing steps that can keep your vehicle looking like it was bought yesterday.

1. Remove the excess gunk
Even if you avoid parking under trees and driving down dusty roads, your car will pick up airborne debris and the occasional bird dropping. Flying insects, tree sap, tar from newly paved roads and bird excrement all contribute to additional wear on your car’s exterior.

If bird droppings or dead bugs are left sitting on your car too long, the acid in them can wear away the paint. Likewise, tree sap and flying road tar can adhere to your paint and become harder and harder to remove as time goes on. The best thing you can do for your car is to remove these bits of gunk as soon as they appear.

If you are left with stuck-on filth, removal is an easy DIY process.

DIY debris removal

First, spray adhesive-remover on the spot. For tree sap, tar or another sticky substance, leave sitting for about 5 minutes. For bugs and bird bits, only leave on for a few seconds.
Next, wipe away with a soft cloth.
If necessary, repeat the first 2 steps.
Finally, wash the area with soap and water. Dry with a soft towel to remove any remaining residue.
For especially stubborn spots, you may need to call a professional auto detailing shop.

2. Fix any paint scratches
Exterior damage shouldn’t be ignored. When a paint scratch or chip is left sitting for too long, it can rust and cost more to repair. No matter how small the original damage, it will eventually eat away at the surrounding metal.

Before repairing a scratch yourself, check your manufacturer’s instructions. It’s also beneficial to call your insurance agent and see if your policy will cover exterior repairs that haven’t been caused by an accident.

Fortunately, DIY paint scratch repair is quick and easy. First, run your fingernail gently across the scratch. If your nail gets caught in the paint, it’s a deep scratch that should be professionally repaired. Otherwise, a light buffing polish will remove the scratch quickly.

DIY scratch repair

First, pour a little polish onto a soft terry cloth and gently rub the scratched area.
Next, let the polish dry completely.
Lastly, wipe the polish off with the clean side of the cloth.
If this doesn’t solve the problem, the scratch is probably too deep and needs professional repair.

3. Clean your carpet and floor mats
Your floor mats are intended to protect the carpet from wear and tear. However, dirty, old floor mats make the entire car seem worn down. The best way to keep your carpet (and your entire car) looking new and clean for a long time is to immediately purchase rubber floor mats with deep grooves.

Place these mats in front of each seat, as well as the trunk or rear cargo area. This will prevent any spills or outside elements from destroying the carpet.

If you do have carpet mats, cleaning them is a relatively easy process. Simply remove the mats from the car and place them on the sidewalk or driveway. Then, vacuum any dirt or filth and use a carpet shampoo on any stains. Let the mats air-dry before replacing in the car.

To clean rubber or plastic mats, remove the mats from the car and spray down with a water hose. Then, scrub away any remaining dirt or stains with a brush soaked in soap water.

Your car’s carpet can be cleaned the same way as carpet floor mats. Vacuum up any dirt and use a carpet shampoo on stains. However, be careful not to use too much cleaner or water at one time. When the carpet is soaked and cannot air dry, mold and mildew could grow.

DIY car detailing can greatly improve the appearance of any car.
If you regularly follow these 3 easy DIY car detailing processes, your vehicle will look good as new for years to come. If you need help detailing your car or would like a professional auto detailing shop to perform the process, call your local Christian Brothers Automotive. Our friendly, ASE-certified technicians will show you the Nice Difference!

- See more at: http://www.cbac.com/blog/3-easy-diy-steps-detailing-car#sthash.nnbuXrSS.dpuf

Sunday, September 14, 2014

How to Install Volvo Vida dice on win7 64 bit?

When I installed Volvo Vida dice on win7 64 bit, my pc tells that code 10 cant start driver, all order soft from vida runs on normal only drivers stopping work. Then obd2works.com engineer help me solve the problem, solution: if you have newer pc 7 64 bit you must uninstall the usb 3 drivers and soft, please refer to the support from microsoft official website “Install and use Windows XP Mode in Windows 7” link: http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
And run XP mode works good for VCM, LEXIA, PP2000, Vida tested and works.

How to make a key via Original BMW AK90 Key Programmer

My keys was missing when my BMW 5 series E39 EWS immobilizer 2000 car was at the village– The nearest service station to two hours away.Luckily I was able to get a new key by encoding without the original key case. Otherwise, I will pay a lot of money or new lock cylinders.
Then, I learned how to do a BMW car keys, my locksmith use a tool named BMW ak90. Let’s have a look how to use it and what’s the feature it owns.
How to make BMW car key with AK90 key programmer?
Firstly, remove the ECU chip, ESL from your BMW car, insert it to AK90 diagnostic tool, later it will read all the code date information from your car.
Secondly, plug the key into BMW ak90 programming keys, which reads the data information from your car key.
Then, the information of your car and your key is matched, then the AK90 key maker will tell what’s the next step, so you just following it, step by step, you will get what you want.
bmw ak90
When making the new keys, you can insert the ECU and ESL to your car, and insert the key; it can start your car then. BMW ak90 does not need to remove chip when making a new key:
1, when programming new keys, no need to remove chips, but connect chip socket to EWS and another interface to AK90 host.
2 directly make new key with AK90 key programmer via wiring.
3, no power charger, but supply power via USB cable, no need external power; it is supplied with special chip socket.
4. Directly reading data dumps from MCU which marked 1D47J, 2D47J, 0D46J, 2L86D without removing MCU from circuit board, easy to do yourself.
5, with the help of software you can renew, lock or unlock keys as well.
6. Programming original chips “EML 10030A” for making keys.
7. Identifying keys for all EWS and CAS, showing VIN, key No. It support change VIN, but not support do mileage.
To buy BMW AK90 AK90+ Key Programmer for all BMW EWS V3.19,please visit shop www.obd2works.com

Monday, September 8, 2014

Three necessary automotive multi-meters when wiper does not work

In the second season, often rainy, if the car windshield wiper went to wrong, wipe slowly or any other problem, then it will be an dangerous thing when driving in the rainy day.
To find what is the reason of your windshield wipers's malfunction and not work, the experienced car repairman know it is very important to investigate the wiper motor and switch to determine if either is causing the problem.
For example,1999 Buick Century . The first thing to check is the fuse for the wipers, in the fuse box. You can pull out the fuse and check it four ways. 1. Try replacing it with a new fuse (of the same amperage) 2. Look at it for internal breakage or discoloration. 3. Use a tester light thingie (clip on one end of a wire, and a pointy poker at the other end) connected to both ends of the fuse. If it glows, it’s good. 4. Test it with an automotive multi-meter connected to both ends of the furse. (Set to test Ohms/resistance) If the needle goes up near 0, it’s good.
As known, every experienced auto technician has one multi-meter in the repair box, and you?
If you haven’t own an automotive multi-meter yet, why not choose one of from the three most popular ones:
Car Auto Power Electric Circuit Tester Multimeter+Lamp+Probe+Light 0-380Volt

With the increasing technical updates, the unceasing development of auto industry and the continuous renewal of auto parts and electronic components,
auto circuits gradually increase, but the detection tools of maintenance telephone are very few. Jiaxun automobile circuit tester excludes difficulties and
anxieties for vast auto repair factories, 4S shops and auto headquarters.

1. It can accurately detect various line faults under the situation of no damage to rubber cover.

2. It sets multimeter & test lamp gear which has the functions that the top-level multimeter fails to do. It specially detects the wires with bad contact and aging wires.

3. It can detect each fault in the place where the space is narrow and light is weak.

The product is the only four-in-one product with the functions of multimeter, test lamp, lighting lamp and probe.

All functions of digital multimeter are intelligent. Backlight is closed automatically after the backlight of 30s. All ranges are intelligent, and the instrument shuts off automatically after the stop of use for 20min.
It is convenient to use, efficient to detect, easy to operate and has reliable performance.
Please pay attention to following tips before you use this tool:
1. Light test function can use 12v-24v power, AC, DC both can use;
2. LED test function can only use DC, no AC.
3. Light test and LED test can not used to do 220V AC test. Otherwise will burn this tool.

MST-2800B Intelligent Automotive Digital Multimeter

MST-2800 Intelligent Automotive Digital Multimeter adds new high resistance measurement, resistance measurement range from 200Ω-200MΩ, with measurement range, and precision accuracy. What’s more, it can meanusre AC and DC voltage, DC current, resistance, electric capacity and duty ratio, temperature, transistor, diode parameters and buzz off, auto dwell and engine speed, the backlight display etc. This product is suitable for vehicle inspection and maintenance, engineering, laboratory testing, production test etc., is the ideal and portable automotive repair and maintenance tools.
New VC97 3999 Auto range multimeter vs 15B Tester


For more car diagnostic tool,car key programmer,ecu tool,please visit our shop www.obd2works.com

Friday, September 5, 2014

Buick communication network troubleshooting examples

CLASS2 communications network maintenance should note the following points: 1, CLASS2 allowed to pass data between each other as the control unit also allows communication with the control unit fault diagnostic these. The control unit is a body control unit BCM (BCM D-CAR cars not access CLASS2), electronic brake control unit, control unit air conditioning systems, air bag control unit, a combination of instruments, power system control unit and key confirmation PCM system control unit or the like.
     2, if a control unit connected to the data bus can not CLASS2 diagnostic (Tech2) to complete the data exchange, while the other control units communicate properly, it shows that the control unit is faulty or the control unit to the assembly between SP205 data cable break or poor contact (each control unit is connected to the CLASS2 bus through SP205).
     3, CLASS2 communication network static voltage is 0V, the voltage enabled to 7V. If the connection of the control unit data bus or data bus diagnostic connection is disturbed, such as a bus or on the ground short of power, will cause all of the control unit can not be normal data communications.
     Here I met through the fault case actual repair work to help overhaul maintenance personnel to learn more about the techniques and diagnostic thinking CLASS2.
     Case one
     Symptom: a 2001 Buick GL sedan, mileage 80,000 km, reflects the owner when the vehicle is traveling on uneven pavement, dashboard instrument lights (warning lights) sometimes all lit after starting the vehicle instrument similar case the self-test, but the engine does not stall.
     Troubleshooting: When traveling on a bumpy road, the lights on the dashboard lit up all of a sudden failure believe that some maintenance personnel have encountered, according to the failure phenomenon, first be sure to intermittent electrical fault. For the car, the reasons for this failure may have a meter or meter power line failures have bad place, because the instrument lights corresponding to each system control units are associated with CLASS2 bus, so the bus is also faulty CLASS2 possible.
     Performed on uneven pavement road test, when the body undulating, the meter on the dashboard instantly lit lantern, but will soon extinguished, each instrument indicating change slightly. Check with Tech2 instrumentation systems IPC, no fault code, check the connections on CLASS2 bus control units, control units exist within different fault code, indicating a greater likelihood of failure caused by CLASS2 bus.

A vehicle grounding point G200 map
     Because of the control unit is connected via SP205 CLASS2 assembly onto the bus, so first check assembly SP205, but found no poor contact. So what factors will affect all control units connected to the bus on CLASS2 it? I think the most likely reason is that the battery voltage, battery voltage when the resistance changes or changes take place, it will affect the data transfer CLASS2 bus.
Fixed at one end of the multimeter plug assembly SP205 A foot, by measuring the voltage on the data line voltage block, and when the engine operating voltage of 7V, normal. To simulate the conditions of a failure, a significant body shaking, sometimes found that the voltage fluctuations. Power generator voltage measurement for 14V, standards-compliant, check the main grounding line, body grounding point G200 (Figure 1) without exception, is located at the transmission housing grounding point G117 / G113 (Figure 2) virtual access, and the obvious signs of a current ablation. Ground line polished and properly fixed, the road test after repeated failures no longer occurred.

Two transmission housing grounding point Figure G117 / 113 virtual access
     In the actual repair work, bad circuit Ground fault or poor conduction mostly refers to disconnect the wires connecting the terminals and connecting terminals loose rust and so on. For such a fault, the fault can be found normally by visual inspection, or may be performed to measure the voltage drop measured resistance value. I think, in the detection of CLASS2 bus, if they can use an oscilloscope to observe the waveform CLASS2 on communications data would be very intuitive, and can shorten the repair time.
     Ground line is part of the circuit loop, but in many vehicles, a large number of electronic devices rely on a few common grounding wire to pass current, I think this is because the use of a small amount of good quality grounding wire in the circuit (that is the main grounding line) and higher reliability than using multiple grounding lines. Many grounding at both ends of the line also uses a specially shaped grounding wire connection terminals, gaskets and fastening screws, which is given to the grounding line special consideration.
Case II
     Symptom: a 2004 Buick GL8 commercial vehicle, mileage 25,000 km, reflects the owner sometimes does not respond when starting the starter, and the anti-theft warning lights, gear indicator is not lit, the other instruments showed no change in the law.
     Troubleshooting: Because the car comes to a number of system failures, failures are quite complex, so each first with Tech2 diagnostic system control unit. However, when a fault occurs, the use of the control units can not enter Tech2. I think, though failure phenomenon mainly in the dashboard of each indicator exception, but the possibilities of the instrument lights at the same time very little damage. Gear signal, water temperature signal, speedometer signal, fuel gauge engine tachometer signal and the signal from the power system are a control unit PCM, PCM accept sensor signals and transmitted to the instrument via CLASS2 bus, so the most likely point of failure is PCM or CLASS2 bus.

Figure 3 engine control system wiring diagram
     First check the PCM power and grounding lines and found no abnormalities. Disconnect the PCM harness connector on, turn the ignition switch, measure the PCM harness connector C1 on the 59-pin-to-ground voltage of 5V, while CLASS2 static voltage should be about 0V, which shows the existence of the power bus CLASS2 where a short circuit. To narrow the scope of failure, one by one off the assembly line each system data on the SP205, SP205 when disconnected D-foot CLASS2 bus voltage drop 0.6V.
     Because D-pin data cable and radio connected, then remove the radio check and found that the radio circuit board traces of corrosion by water, there could be air-conditioned water infiltration. After replacing the radio and air conditioning pipe properly handle nearby car troubleshooting.
     Because a radio malfunction CLASS2 bus power supply short circuit, causing the PCM data can not be correctly transmitted to the meter, the meter indication of the cause of the abnormality, but also led to the engine can not start.
Case III
     Symptom: a 2003 Buick Regal 2.0 sedans, mileage 30,000 km. Turn the ignition switch, fuel gauge instrument self-test is complete return to zero, the fuel warning light, warning buzzer sound. Start the engine, the starter does not have any reaction.
     Failure Analysis: After the fuel level signal transmitted by the level sensor to the power system control unit PCM, after CLASS2 bus transfer to the instrument. When a fault occurs, the fuel gauge return to the zero position, the fuel warning light, warning buzzer sound, these phenomena show that the signal does not reach the fuel meter, probable cause is CLASS2 bus can not communicate with the PCM, should focus on checking CLASS2 bus, PCM, PCM's power cord and grounding lines and other lines. Maintenance process: Use Tech2 check the control unit, PCM internal fault codes exist U1000 (two serial data loss), U1016 (loss of dialogue with PCM), U1064 (loss of dialogue with BCM), these buses can not fault code and instructions CLASS analysis of PCM communication is correct.
     Reference engine control system circuit diagram (Figure 3), remove the PCM harness connector on the plug with a test light to detect C1 of the 20th pin, pilot lights. Turn the ignition switch, with a test light to detect C2 of the 24th pin plug, test lights, detect C1 plug in the 19th pin, try lights. When the ignition key is in the starting block, the C2 with a test light to detect the 23-pin connector, test lights. Disconnect the negative terminal of the battery, electrical multimeter to check with a stop pin plug C1 No. 56, No. 57 pins, 60 pins and 16 pins to ground resistance, are in line with standards. Check CLASS2 bus assembly SP205 B pin harness connector to the PCM harness connector C1 of the resistance between the No. 58 pin, standards-compliant, and no plug has bad place. As can be seen from the above examination, the possibility of internal PCM failure is relatively large, so the replacement PCM test, but the fault was not ruled out. The direct use of jumper assembly SP205 B-pin and pin connector No. 58 PCM harness connector C1 in, test the fault persists, but doing so may exclude the possibility of problems in the CLASS2 bus. So the point of failure only PCM power cord and grounding line, or in front of the measurement methods or data is incorrect. Then I found the pilot light is used to test diode test lamp type, such as no-load test lamp type test light, as long as the drive voltage greater than 2V pilot light will light up, the pilot light can not be used to test the line with a fuse cord.
     Pilot lights with active load measurements on C1 PCM harness connector of the 19th pin, test light does not shine, which is different from the previous test results. Check the instrument panel to the right of the A7-A8 fuse is not damaged, remove the engine compartment fuse box to check the wiring harness connector pins found in A7 C2 pin plug socket larger. After repairing the wiring harness connector, test troubleshooting.
     Review Summary: Since C1 PCM harness connector on the on the 19th pin power cable circuit, resulting in PCM can not communicate with CLASS2 bus, resulting in the car faults, I used an inappropriate test lamp also walked some repair work detours.
obd2works.com, as a professional car diagnostic scanner online supplier, providing our customers with a vast range of high-quality and affordable automobile maintenance tools.Our main business line covers: Automotive Professional Diagnostic Tools for OBD I and OBD II compliant vehicles; Auto Diagnostic tool, OBD2 Code Scanners, ECU Chip Tuning Tool, Car Key programmer Mileage Programmer as well as other more featured products.

Thursday, September 4, 2014

Peugeot,Citroen cars do adaptive initialization With pp2000 and DiagBox

Generally, we use the car keys in the lock made ​​by hand throttle initialization, initialize the throttle, but these are static, but also through the car for some time, let the computer to self-learning.
        When we change some parts after, this approach is not so complete. For example, we changed the oxygen sensor, wash the oxygen sensor;we changed the canister solenoid valve, for the engine speed sensor, exposing the cylinder head, for the valve, ......., after these jobs done, we had to let the engine once adaptive initialization. In fact, allow the engine to turn up from the cold idle until hot car; Thus, the engine control computer will be in each of the longer this process, the exchange data with each other, match each other, so that to achieve the best fit between the various components state. The result is a car with a better engine, better economy.
        Here, Citroen C2 through to do a "adaptive initialize" operation, through the software interface operating picture, to put this method is more intuitive to introduce to you. Of course, Peugeot,Citroen car adaptive initialization method similar.






Piracy diagnostic tool is not as automatic detection diagnostic sometimes reads like above a picture of the vehicle VIN code, that can not reproduce this car's VIN number, it will jump out of the image below the display screen. Never mind, manually enter the VIN is the same.



Piracy diagnostic tool will appear this,never mind, Click "Back", and to unplug diagnostic lexia 3 pp2000 USB and then plug , after hearing the "boom" is heard, then re-insert the USB plug, when you hear "ding-dong" sound, we proceed to the next.













Patiently waiting for the countdown to the end.
The following screen appears, the mouse will not mess up, do strict accordance with the requirements of the screen,car idling, until hear the cooling fan start up, go to the upper right of the screen to "Confirm" icon; otherwise , skip the initialization process, and nineteen step above full to waste, have to start over

10 stuff you got to comprehend the 2016 Volvo XC90

Volvo touts its all-new 2016 XC90 SUV because the initial product of the “new Volvo” and also the launch of a company-wide rebirth. whereas Volvo isn’t utterly flipping the script—and, say, creating six-wheeled military motorcycles—the XC90 will represent its initial severally developed automotive since being financially sugar-daddied by Chinese auto manufacturer Geely.
The 2016 XC90, that we have a tendency to recently conjointly in, is additionally the model’s initial clean-sheet plan in additional than a decade. what is more, the XC90 debuts on the brand’s scalable Product design, a standard platform which will underpin a spread of vehicles. Underscoring the crossover’s importance was the flotilla of engineers, designers, and executives that Volvo had reachable at the reveal event we have a tendency to recently attended in national capital, Sweden. we have a tendency to poked and prodded for the foremost attention-grabbing details on the new SUV, and these ten things area unit the result. Enjoy, then go forth and drop Swedish information on some fools.
1. It Flies the Swedish Flag

Volvo stuck a small, fingernail-sized Swedish-flag label on the sting of the XC90′s front rider seat. Shutthefrontdoor, right? Modesty could be a quintessentially Swedish attribute, therefore don’t be fooled by the flag’s smallness: Volvo is passing, overpoweringly happy with its Swedishness, which the flag is that there in the slightest degree is the nearest you’ll return to a Scandinavian boast.
2. Volvo Didn’t Banish cubic Entirely

Volvo uses the term “Thor’s Hammer” to explain the XC90′s uncommon T-shaped semiconductor diode running lights, that is Associate in Nursing awe-inspiring however maybe too heavy-handed descriptor for the delicate aesthetic intention of the units. in step with Volvo’s vice chairman of style, there's still a current perception among shoppers that the whole builds solely cubic cars, therefore the stylists place a tough, 90-degree styling cue right the car’s face to visually connect the XC90 to the firm’s rhetorical past whereas still advancing style.Volvo vida dice
3. There’s a bittie, itsy-bitsy little bit of war vessel in There

In its quest to carve out the maximum amount interior area as potential, Volvo fitted Associate in Nursing ultracompact multilink rear suspension with . . . a thwartwise composite leaf spring! Yep, similar to the Chevrolet war vessel ray. If you choose for the XC90′s out there air suspension, however, you lose the rear leaf. Fun fact: Volvo used this style before on the 960 wagon.
4. the inside presumably Is a lot of helpful than the Honda Fit’s
Thanks to the compact rear suspension afforded by that thwartwise leaf spring—and the tidy implementation of the optional air springs—the XC90′s aft accommodations area unit ethereal and commodious for each individuals and freight. Volvo additional capitalizes on the area by giving the second- and third-row seats the power to fold utterly flat. after we say “flat,” we have a tendency to mean it: born down, the seats type a swish, uninterrupted load floor from the hatch sill to merely behind the front seats. As a bonus, every of the 5 rear seats will be singly planar .
5. The Rear Seats area unit Real—and for Real individuals
Even a lot of superb than however they fold is however the seats really hold individuals. The third row is tolerable for adults, and every of the 3 second-row butt garages will slide fore and aft freelance of 1 another and supply singly adjustable backrests. The third-row chairs supply no adjustment once raised, however they’re totally realised seats rather than the same old pop-up jump seats seen most all over else.
6. Swedish Glass now not simply Refers to Scandinavian Narcotics
When extolling the XC90′s Swedishness, one should purpose to the rig’s dazzling crystal shift knob, that is oversewn by Scandinavian maker Orrefors. we have a tendency to identified from one in all the SUV’s interior designers that every unit is singly crafted and roughly fifteen glassmakers handle all of the assembly.
7. The XC90 invariably Watches Its Rear
Using its rear-facing microwave radar, the XC90 will Associate in Nursingticipate an impending—or what it determines to be impending—rear-end collision. Sensing an instantaneous impact, the XC90 cinches down the front seatbelts and locks the brakes to attenuate occupier acceleration. Outside of the U.S., the automotive conjointly can flash its blinkers to do to capture the arriving inattentive driver’s attention.
8. The Badge Is Down with the Diagonal
Closely examine the XC90′s grille, and you’ll see that the acquainted Volvo iron mark—the spherical badge with the arrow protrusive from the 2 o’clock position—lines up with the brand’s signature diagonal grille slat. this is often a primary, and currently you’ll notice it on each new XC90 you see.

9. Volvo Is therefore smart at Safety, It Don’t would like No Stinkin’ Rear facet Airbags
For a whole that lives and breathes safety, Volvo had US scratching our heads with its call to not embody rear facet airbags—as distinct from drop-down side-curtain airbags—on the XC90. once asked why rear facet airbags, that have unfold across the business within the past few years, weren’t a part of the XC90′s package, Volvo’s head of active safety cleared things up: The engineers were able to match the side-impact performance of the front-seat space within the rear mistreatment strictly passive measures like thicker doors and a powerful C-pillar.

10. hit Pedestrians are going to be Associate in Nursing Explosion-Free expertise

Just as Volvo was able to do a lot of with less once it came to rear-seat side-impact performance, so, too, was it able to contour the XC90′s pedestrian-safety list. though Volvo pioneered technology like hoods that raise up in bicycle with ped-protecting airbags to melt a person’s landing, the corporate ditched each here. That’s mostly because of the XC90′s four-cylinder-only engine lineup. The fours area unit mounted low, departure lots of air area below the hood to make sure that, within the event of a pedestrian impact, the unfortunate soul is unbroken removed from harmful arduous points just like the engine and also the strut towers.

Monday, September 1, 2014

what is the different between XPROG-M V5.3 plus and XPROG-M V5.0

Which programmer reads and writes ECU for MCU/MPU Motorola 9S12XD, Motorola 9S12XD-secured and Motorola 9S12XHZ?

I am positive lots of Xprog-M V5.0 consumers will agree XPROG-M Programmer V5.0 is usually a good ECU programmer, but it is actually a pity that XPROG-M doesn't do the job with MCU/MPU Motorola 9S12XD, Motorola 9S12XD-secured and Motorola 9S12XHZ.

At this time I've one particular instrument to introduce, it might create and edit ECU for MCU/MPU Motorola 9S12XD, Motorola 9S12XD-secured and Motorola 9S12XHZ, it is actually XPROG-M V5.3 Plus. One additional variation is the fact that Xprog-M V5.3 is packed with one dongle. Please seem in the following photos in particulars.


Let us what much more chip models XPROG-M V5.3 Plus compatible with as follows.

68 HC908:

XC68HC708AZ60 (8 H62A)

0 L72A

3 K56G

0 L07H

0 L59XZ, studying and writing, help network security box down from the studying and writing

Siemens IMMO new 0 L72A E safety box down from reading through and writing

MingRui SRS laptop or computer one L02M literacy as well as the wiring diagram

one J35D (68 HC908AZ60) EEPROM of studying and writing

9 S12:

9 S12DT256 (four L91N) EEPROM FLASH, studying, writing

9 S12DT256 (4 L91N) EEPROM FLASH encryption, reading, creating

9 S12KG128 9 S12KT256 9 S12KG256 (MASKS = 2 L33V, 0 L74N), reading through, creating

9 S12KG128 9 S12KT256 9 S12KG256 (MASKS = two L33V, 0 L74N) encryption, reading, creating



9 S12X:



9 S12XDA/B/G 128 EEPROM FLASH, reading, creating

9 S12XDA/B/G 128 EEPROM FLASH encryption, reading, creating

9 S12XDT/P384 EEPROM FLASH, reading, writing

9 S12XDT/P384 EEPROM FLASH encryption, reading through, creating

9 S12XHZ256, 9 S12XHZ384 EEPROM FLASH, studying, creating

9 S12XHZ256, 9 S12XHZ384 EEPROM FLASH reading and creating, reading, creating

9 S12XHZ512 EEPROM FLASH reading through and writing (support fox instrument replacement CPU)

9 S12XHZ512 encryption EEPROM FLASH reading through and creating (help large 6 way see instrument)

2011 new sound of S12XEG384 BCU 9 (three M25J) EEPROM study, the wiring diagram



TMS:

Some TMS370 374



Other:

Add the following meter:

2006 TuAn

2009-2010 phase into soar crew champion edition

2010 one.4 TSI stage into soar crew

SEAT 2006 LEON

Add some meter hookup

BOSCH engine pc MPC wiring definition



Bundle includes:



XPROG-M machine

USB cable

USB dongle CD software package

16PIN cable

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP144 adaptor

QFP80 adaptor

QFP64 adaptor

QFP112 adaptor

HC05BX adaptor (PLC52 1-002-0004)

HC05BX adaptor (QFP64 1-002-0005)

MC68HC05V12 adaptor (1-002-0009)

HC(S)twelve BDM adaptor (1-002-0017)

M35080 ICP adaptor (1-002-0006)

TMS374 adaptor (1-002-0010)

TMS374/uPD78 IC adaptor (1-002-0008)

TMS370 adaptor (PLCC28 1-002-0002)

HC11E9/EA9 adaptor (PLCC52 1-002-0011)

TMS370 adaptor (PLCC28 1-002-0001 / PLCC68 1-002-0003)

TMS370 adaptor (PLCC28 1-002-0001 / PLCC68 1-002-0003)

Wednesday, August 27, 2014

Autel Maxidas DS708 free update by internet!

Delicately developed by the most distinguished experts of this industry,Autel MaxiDAS DS708 is a state-of-art diagnostic system that delivers more accurate, more stable, more comprehensive, easier and faster diagnosis.
The new generation platform stands out in a variety of tools by providing incredibly high performance with intuitive peration.
Right for the first time, workshops and technicians could find an OE-level diagnostic solution designed for the aftermarket.
The Maxidas DS708 is the key to gain customer confidence and boost your bottom-line.
Can you afford to be left behind?

Product Features & Functions
● Extensive vehicle coverage for more than 30 domestic, Asian and European vehicle makes;
● Deep vehicle system coverage for ALL electronic systems;
● Complete function capability including live data, ECU testing and so many others;
● Unparalleled OBDII functionalities–supports ALL 5 OBDII protocols and ALL 9 test modes;
● Automatic Wi-Fi updates available in new software releases;
● Innovative dual-processor technology for quicker diagnostics and boot-up;
● The genuine Windows CE operating system allows for more stable performances, better compatibility and expandability;
● WIFI internet capability allows for wireless access throughout the workshop;
● Internet explorer brings internet resource of your choice at your fingertips
● Advanced USB communication for faster operation and more accurate diagnostics;
● Automatic Wi-Fi updates available in new software releases;
● Extremely easy-to-us with touch-screen operation and intuitive operation;
● Extensive vehicle coverage for more than 30 domestic, Asian and European vehicle makes;
● 7 inch 800 x 480 pixel TFT color display provides better view of test results, graphs, web pages and etc;
● Unique shop tough ergonomic design features multi-layered rubber protection and strong housing;
● Intelligent memory of vehicles for easy and quick diagnosis of tested vehicles;
● Captures, saves and prints screenshots for convenient troubleshooting;
● Displays live data in text, graph and analog for easy data review and analysis;
● Records and playbacks live data to pinpoint troubles of sensors and components;
● Innovative graph merging for easy and quick detection of intermittent problems;
● Automatic WIFI Data Logging for quick and accurate technical support and troubleshooting;
● Built-in overvoltage protection keeps the instrument and vehicle from unwanted damages;
● Creative remote diagnosis for convenient demonstrationand training;
● Powered by Autel® Uni-SCANTM technology with no need for extra adaptors or “keys” ;
● Prints out recorded data any time and anywhere with Wi-Fi printing capability.

Specifications
Operating System: Windows CE
CPU: ARM9+ARM7 dual processor
Memory: Max. 4 Gigabyte SD card
Communication Interface: OBD, USB,Ethernet
Input Voltage: 8.0-32.0V power provided via vehicle battery
Power Consumption: 8W
Operating Current: 500mA
Display: Backlit, 7″ TFT (800*480 dpi) color display with touchscreen
Operating Temperature: 0 to 60°C (32 to 140 F°)
Storage Temperature: -10 to 70°C (14 to 158 F°)
Operation: Touchscreen and one rubber key (ON/OFF)
Printer Interface: Wi-Fi, USB, Ethernet
Housing: Strong plastic housing with protective rubber boot
Dimension: 282mm (11.10″)*163mm (6.42″)*60mm (2.36″)
Weight: approx. 2Kg (4.41lbs)
Protocols: ISO 9141-2, K/L lins, flashing code, SAE-J1850 VPW, SAE-J1850 PWM,
CAN ISO 11898
ISO15765-4, Highspeed, Middlespeed, Lowspeed and Singlewire CAN
Contact us:
Skype: obd2works
Email: obd2works@gmail.com

Tuesday, August 26, 2014

Professional OBD2 Diagnostic Tool nissan Consult III

Nissan Consult III is automotive vehicle diagnostic tool for Nissan. Consult III Diagnostic Interface can realize the function of VI model. nissan Consult III Scanner support multi-language.The system is able to perform accurate diagnosis while not having to accept the diagnostic skills of technical workers at the business organisation.Increased potency in operations supported wireless technology.
With wireless vehicle communication interface, it's doable to visualize the condition of the vehicle from either within or outside the vehicle. At dealerships in Japan, it's doable to access the nissan network to retrieve each the upkeep technology knowledge associated with the identification results and spot adequate info on service manual. The dealerships are able to access their service info and visit the vehicle’s maintenance history on the laptop personal computer.
Want one powerful scanner for your nissan diagnose? Here automotive vehicle diagnostic obd nissan Consult III could be a skilled diagnostic tool for nissan cars. as well as nissan cars from totally different space, like Japanese, North yankee. virtually as well as all nissan automotive model.

1. Languages: English, Finnish, French, German, Russian, Greek, Italian, Japanese, Spanish, Chinese(Traditional), Chinese(Simplified)
2. Special Function: currently Consult 3 will do GTR,but it desires customers have GTR Card
3. nissan Consult III VI Registert Password: nissanconsult3
4. OS Requirement: Windows XP (SP2) or Windows XP (SP3)
5. Bluetooth Communication Distance: Radius of 5m Approx
6. Update By CD
7. Support automotive Model:1996-2011
Nissan Consult III Vehicle Diagnostic Tool consult III software system version: V9.21.01.00.00
The selection of will sort moreover because the identification of malfunction locations area unit fully machine-driven, permitting will identification to be done seventeen times quicker than previous technique wherever the medical specialty system required to be supplemented by the service manuals. Repairs involving reprogramming of the in-vehicle laptop may be completed one.5 to 2.5 times quicker with the new system.
Tips before putting in nissan Consult III software:
1. Before you put in nissan Consult iii update software system, you want to uninstall any previous versions of the nissan consult III software system.
2. First, install nissan consult 3 software system V9.20 (the image on the disk), then run Consult-III_V9.21.01.00.00_setup.
3. additionally, once you install nissan Consult 3 v.9.21.01 software system, you want to additionally install all the applications contained within the nominal CD.
This article regarding nissan consult III is collected by obd2works.com, if you've got any recommendation on nissan consult 3, pls feel free to contact obd2works – china automotive vehicle Diagnostic Tool Center.

Thursday, August 21, 2014

HOW TO USE BMW CARSOFT CABLE WITH INPA

BMW Carsoft is employed to check automobile management unit and overall condition, service interval reset, part activation, live data, least common multiple reading, sync, EWS and eu adaptation values, and coding.
BMW INPA is employed for automobile designation, and straightforward driver programming.
But a way to use Carsoft interface with BMW INPA? nowadays i might wish to bring up it.


First, install the BMW INPA computer code.
1. Run the file “Instprog.exe”
2. choose English, click Continue
There will show the Reference List. Click Continue.
3. choose C:\ as destination drive, and click on Continue
4. choose the configuration. Let’s build it “BMW cluster Recertification programs UK”, and click on Continue.
5. choose “Complete” choice next to the “EDIABAS and INPA”, click Continue.
6. choose OBD as interface and click on still begin installation.
7. Click finish once the installation finished.
8. Open Windows soul and realize “C:\Ediabas\Bin”, open it with pad of paper
9. realize the “RemoteHost” and “Port”. modification the worth with “192.168.68.1” and “6801” severally.
Save and shut the file.

10. Open the folder “C:\EDIABAS\Hardware\OBD” and run “OBDSetup.exe”.
Press any key to continue.
11. Click Windows+Break to open the System Properties: Open “Advanced”, click “Environment Variables”,
12. choose the “Path” system variable, click Edit.
Add a punctuation at the top of the variable statement, then kind “C:\ediabas\bin”, and click on OK.


Connect your CarSoft cable to the diagnostic port, and your laptop.
13. Open Device Manager, and ensure that your port is:
a. appointed to COM1
b. first in first out buffers area unit enabled
c. Receive and Transmit Buffers area unit set to eight
Please attention: it's necessary to run CarSoft once to urge the interface to figure with INPA.

14. begin CarSoft, choose “Perform Diagnosis”, click DDE.
If failed, you wish to urge your communications along with your interface and CarSoft operating before continuing: begin INPA with the route INPA(_.IPO)

Now it ought to be done to run Carsoft cable with BMW INPA. And you'll attempt to check your automobile.

Wednesday, August 20, 2014

MST-9001D Diesel Engine ECU Test Bench PHS

With straightforward and terse look, cheap style and easy-to-upgrade code, the Diesel PHS laptop take a look at bench is that the right-hand to electronic mechanical system system teaching and coaching, decoder demonstration, testing and maintaining laptop board.
MST-9001D internal-combustion engine eu take a look at Bench parameters:
1. Equipped with four analog signals with electronic voltmeter to exactly show the voltage of analog signals.
2. Equipped with four wave shape output channels through that you'll edit rotating shaft and shaft signals of varied automobile models. it's Convenient and correct.
3. Accurately simulate the operating condition of diesel gismo.
4. Equipped with three analog switches, you'll set the of poker level output as you please.
5. For the convenience of use, the new model may be keep at laptop because the type of terminal knowledge and wave shape altered by laptop. once required, you'll transfer the info and wave shape to the workplace.
6. The machine adopts high-powered switch power offer with the perform of short-circuit protection.
7. For the convenience of users to try to to laptop diagnosing, it adopts the OBD laptop diagnosing conduct plug to check laptop board.

The schematic diagram of the instrument’s association port:

Fuel gismo
Analog signal
Switch signal
Actuator signal
The signal of the rotating shaft
OBD diagnostic interface

Usage of Software:

1. place the "diesel PHS" folder within the C disk director
2. Open the code and determine "the USB driver files"
3. Double-click the "CH341SER drive"
4. Click“INSTALL”
Automatic installation interface
Driver put in
5. Send "diesel PHS" to the desktop so produce a cutoff
6. code interface
7. Check the instrument port variety within the device manager.
8. If the port variety is larger than the COM9, please click the correct button and choose properties
9. choose advanced within the port Settings
10. Set the port among COM9
11. choose a interface Setting to try to to port Settings
To buy this tool ,click the link: MST-9001D Diesel Engine ECU Test Bench PHS

Tuesday, August 19, 2014

Do not forget regular vehicle maintenance and replacement of ignition

In several people's minds, maintenance is nothing over replacement the 3 filters, oil and different consumables. In fact, throughout operation of the vehicle, several components ar in constant wear and tear, routine maintenance, scrutiny vary so much restricted to a few filters, oil, brakes, spark plugs, etc., plenty of places don't listen if the standard scrutiny, maintenance, Associate in Nursingd aforesaid unsure once an sudden failure happens. Here ar a couple of components within the routine maintenance is usually neglected.
Ignition
many folks understand that the spark plugs ought to be modified often, however it ignores the upkeep of the mechanism to different components of the mechanism is one amongst them. once the engine is running, the ignition line usually have tens of thousands of volts of high voltage periodic current, as a result of it work long hours in hot, dusty, vibration setting, aging inevitably occur even broken. Therefore, it and therefore the electrical device, even as the requirement for frequent replacement of consumables.
Aging and broken ignition ignition energy can greatly scale back the engine fuel consumption rises, power down off the hearth will cause serious, and this can be a fatal failure for the engine with a converter is bothered. in keeping with the expertise of foreign countries, although there's no fault, every with twenty thousand kilometers round the mechanism is additionally set to get replaced. several domestic automobile house owners usually need to wait till reminded to visualize the mechanism of the engine cannot be started even seem unstable operation failure, however during this case, attributable to the potential harm to the mechanism parts and waste fuel and decline the engine caused so much on the far side the its own price. additionally, the mechanism cap, distributor rotor, ignition coils, spark plugs and different parts ought to even be within the routine maintenance, scrutiny vary.
Brake disc
Brake disc and brake shoes ar a combine of friction, wear and tear of constraint, brake disc there'll be some wear and tear, the explanation is incredibly easy and obvious, however many folks solely listen once the upkeep vehicle replacement Shoe , however usually overlook the replacement brake disc. the results of excessive disc wear could be a terribly serious, 1st of all, because of the reduced surface roughness, that the particular contact space becomes little, leading to light braking force
additionally, the worn brake disc heat capability decreases once the temperature rises in continuous braking quickly, additional liable to heat recession. All of that ar terribly dangerous driving. Some fix-it shop to severe decline the brake disc shaping machine, surface treatment, ordinarily referred to as "CD", so the surface is sleek, however the disc becomes agent, brake thermal recession are going to be additional severe, additionally, high-temperature tempering causes the disc made within the method, and more reduces the mechanical strength. Generally, when the replacement of the constraint two to three times, the brake disc ought to get replaced. don't feel unhealthy that a couple of hundred greenbacks, after all, human life is invaluable.
Generator bearings
currently several skilled worker was dubbed "stevedore", which means just for components, not repairs. In fact, a number of the components as long as needed maintenance will greatly extend its life, the generator is one amongst them. Some years agone, a generator within the automobile fairly expensive parts, when Hou, a group of maintenance on the generator system, like time lubrication, replacement of bearings, adjust, replace carbon brushes, change the bit within the car's maintenance necessities purpose gap so on, now, with the lower element costs, and routine maintenance of the generator has bit by bit been neglected. In fact, if you sign up accordance with the higher than provisions, the replacement of bearings, a minimum of prolong the lifetime of the generator is over doubled. In general, once the vehicle is traveling 6-80000 metric linear unit, the generator ought to be overhauled, additionally, water pump, steering system pump, air con mechanical device bearings ought to be checked often.
with the exception of some of necessary automotive electrical connectors with gold contacts, most of the remaining fittings ar created ​​of copper - Zn alloy, underneath traditional circumstances, its responsibility is bonded, however if the automobile could be a long-standing in warm temperature, high humidness , jolty run setting, it's doable to supply these joints loose, corroded, poor contact and different failures. Therefore, throughout routine maintenance, ought to specialize in joint examination board pc, sensors, nozzles and different parts, if found to possess loose, unsound development will handle it with petroleum jelly, or replaced with new plugs.
Recommend a diagnostic tool Honda HDS HIM Diagnostic Tool With Double Board,welcome to our shop for shopping auto scanner

Thursday, August 14, 2014

GNA600 Version V2.027 Diagnostic Interface and Honda HDS HIM Diagnostic Tool With Double Board

GNA 600 interface module kit works with the OEM-Honda Diagnostic PC Software (HDS). This is the replacement for the previous dealer tool Honda HIM. It can diagnose all H-onda and Acura vehicle systems on models from 1992 to present year.No matter what Honda GNA600 and Honda HDS HIM to Honda users, both are good options for them. Of course they are different functions, available languages, compatible vehicles, and shapes and so on.GNA600 supports Honda until 2015 year!

What is the highlights of GNA600 2012 version?
1. GNA600 supports H-onda FCX Clarity hydrogen fuel vehicles
2. GNA600 use USB 2.0 communication
3. GNA600 can change the VIN code of CANBUS cars.
4. GNA600 can program the smart key without the programming password
5. GNA600 supports all Acura
6. GNA600 cancel all passwords
7. GNA600 supports odometer rewrite via OBD-16 (Condition: the vehicle with Body-Electric)
8. Currently GNA600 doesn't support ECU tuning.
GNA 600 Specification:
GNA600 comes with the latest software to access immobilizer, reprogram key and
install new or used PCM's functions. Full access to all systems using the only
guaranteed accurate data available. This kit will also give you access to the latest
reflash software for PCM updates. This software also includes a scan tool with
OBD2 access to all other cars 1996 on.
Honda HDS HIM Diagnostic Tool With Double Board supports OBDII, Honda and Acura protocols, covering dynamical, body, chassis, ABS, SRS, Anti-theft, etc; read VIN and IMMO, CAN BUS system, reprogram the auto ECU and so on.

Functions Supported by Honda/Acura Protocols
Reading and decoding fault codes from control blocks memory
Deleting fault codes
Displays system current parameters in digital form
Combined displaying of data
Management of executive devices
Logs keeping - writing and keeping of digital parameters in memory
Special functions - changing of permissible settings of blocks, programming etc.
Functions Supported by OBD-II Protocols
Mode $01 - Displays system current parameters in digital form (up to 8 parameters at once)
Mode $02 - Displays parameters of freeze frame
Mode $03 - Reading and decoding of fault codes from control block? memory
Mode $04 - Deleting of fault codes (memory clearing)
Mode $05 - Displays results of oxygen sensors
Mode $06 - Displays results of changeably controlled systems and components
Mode $07 - Displays results of constantly controlled systems and components
Mode $08 - Management of executive devices
Mode $09 - Displays car identification info
GNA600 Honda and HDS HIM share the same languages, including English, Chinese, Spanish, French, Indonesian, Korean, Portuguese, Thai, Turkish, and Vietnamese, which enables to meet more peoples’ demands.More detailed information about their software, installation and some FAQs, obd2works.com welcome your visit.

Wednesday, August 13, 2014

Not In Good (Insurance) Company

(I work on the front desk at a repair shop. A client calls us back; they called earlier and spoke with someone else.)
Client: “I need you to tell me who my insurance is.”
Me: “…Pardon?”
Client: “I called before and you told me that I needed to find out who insured my car, so tell me who insures my car!”
Me: “Er, sorry, I wouldn’t know that. You need to know who your insurance is with.”
Client: “Well, I don’t know who my insurance is! Find out for me!”
Me: “I can’t do that. There’s more than two dozen insurance companies in the immediate area alone. Do you have any documents about your insurance? An insurance policy? An invoice?”
Client: “This is bullshit! I pay $1000 a month to be insured, and you don’t even know who it is?”
Me: “Sorry, sir, but we aren’t your insurance company. We fix cars. We don’t know who your insurance company is.”
Client: “WHY NOT?!”
Me: “Because we aren’t your insurance company, we haven’t ensured your car, and you have never dealt with us before. There is no way for us to know where your car is insured.”
Client: “When I bought this car, I spent a lot of money on getting this protection pack and I was promised [Insurance Company]‘s extended protection and—”
Me: “Excuse me—”
Client: “I’m not finished!”
(Cue a five minute long rant about how he spent so much money on his car, during which he mentions the insurance company’s name no less than four times.)
Me: “Excuse me, sir. But did you say that you have [Insurance Company]‘s protection?
Client: “YES!”
Me: “So, you mean [Insurance Company] is your insurance company?”
Client: “How should I know?!”
Me: “Okay, well, if you have [Insurance Company]‘s cover, then that is your insurance company.”
Client: “God, was that so f***ing hard?!”
To buy auto diagnostic tool,visit our shop: www.obd2works.com

Tuesday, August 12, 2014

TCS CDP Diagnostic Tools for cars and trucks

After Autocom and Delphi PRO diagnostictool,there have a new product:TCS CDP For Cars Trucks Diagnostic Tools,TCS CDP is a quick and reliable diagnostic tool serving as a link between vehicle and computer. It works on both old and new vehicles.If you want to try this new tool,visit our shop www.obd2works.com.Best Price New Design TCS CDP is a diagnostic tool used with a PC or Pocket PC and powerful CARS Diagnostic software, making it a powerful and flexible tool for all vehicle shops, fleet owners, vehicle testing, road service, police and armed forces.what do you think about the scan tool tcs + cdp pro plus as Autocom version 2013.01. It is like the same as the Autocom.
TCS CDP Diagnostic Tools Fetures & Benifits
This one do not have flight record function.
Multi Colour Indicator. With the multi colour indicator on TCS CDP, you have full control of the diagnostic process. Different colors and sound communicates the status and the placement of the indicator allows you to see it from a far. For example, if the indicator alternates between blue and green the TCS CDP is in communication with the vehicle control unit.
Connector With Led. To locate the diagnostic connector in the vehicle with ease, even if it’s located in a dark and inaccessible place, there is a LED on the 16-pin connector to help you along. The location and the design allows the light to function even when using the adaptor cable for vehicles without a 16-pin diagnostic socket.

Voltage Check. When TCS CDP is connected to the vehicle, the unit will check the battery voltage of the vehicle and automatically adjusts itself to the vehicle’s voltage level of 12 or 24 volts. If the voltage gets too high or too low,TCS CDP will warn you with both sound and light and you will also be alerted through the battery icon in our diagnostic software.
CHASSIS NUMBER VIN. In our CARS software, we have a smart function that allows you to read out the chassis number from the vehicle that you would like to diagnose. This ensures that the right model and year is selected automatically. In addition, engine code for vehicles, which are commonly available on the markets, is also selected automatically.
ISS. Intelligent System Scan (ISS) scans through all the systems in the vehicle and displays the fault codes that are stored in each system. This saves time and you get a quick overview of the actual status of the entire vehicle. When the ISS is complete, you can then select a specific control system to analyse the results further on.
ISI. Intelligent System Identification (ISI) identifies and selects automatically the type of controller that is mounted in the vehicle. This ensures that the diagnostic session is performed correctly with the correct parameters as required.
Report Function. Under this function tab, you will be able to see the adaptations and adjustments that are possible for a specific vehicle without having the vehicle near you. Together with the help texts as a guide, you can plan and be effective in your work; even under complex situations.
OBD-Funtions. TCS CDP is equipped with an unique multiplexer technology, which allows it to be used on all types of vehicles, regardless of voltage levels and communication standards. For those vehicles that do not use the standard 16-pin connector, we offer a complete set of certified and customized adapter cables and kits.
Universal. For most OBD functions, such as adjustments and programmings, there are detailed instructions and help texts to assist you in your diagnosis work. You will find step by step information about prerequisites, preparation and implementation of various functions; making even the most complex function simple to perform.
Help Function. For most OBD functions, such as adjustments and programmings, there are detailed instructions and help texts to assist you in your diagnosis work. You will find step by step information about prerequisites, preparation and implementation of various functions; making even the most complex function simple to perform.
WWW.OBD2WORKS.COM - leader in OBD2 diagnostic tools on the French market, we offer products: auto diagnostic tools, obd2 scanners, OBD diagnostic tool for French car, diagnostic cable car diagnostic cable VAG automatic transponder chip, key program tool, car key replacement, change of automobile mileage, etc.

Monday, August 11, 2014

2014 New design Tcs CDP CDP Pro OBD2 Scanner

2014 New design Tcs CDP CDP Pro OBD2 Scanner available obd2works.com .The price is very cheap and the diversity of function, so there must be a value that you have.Let me introduce you one by one here!
2014 Version CDP Pro + Bluetooth TCS CDP 2013.03 with Keygen
Tcs cdp pro + is a universal diagnostic tool newly released, it can work for cars and trucks, it can make cars with bluetooth, easy to install and keygen for activation.
Top 6 reasons to get new TCS CDP:
1 Software version :. V2013.03
2 Bluetooth Distance: 2M-5M
3. supported language: English, German, Spanish, French, Italian, Portuguese, Dutch, Romanian, Polish, Czech, Dansk, Turkish, Greek, Hungarian, Norwegian, Russian, Serbian, Swedish, and so on. (If you can not find your language please contact our customer service. Because it keeps updating.)
4 Can work on Windows XP and Win7 systems
5 Cam works for cars and trucks.
6 With Keygen free for activation.
2014 Version CDP Bluetooth TCSCDP Pro+ with 2013.03 Keygen and 4G Memory Card

Tcscdp pro+ est un outil de diagnostic nouvellement produit universel, multi-langues, avec le bluetooth et la fonction de la carte de TF, peut faire des voitures et des camions, facile à installer et activer.
Top 7 des raisons pour obtenir un nouveau TCS CDP:
1.Software Version: V2013.03
2. Nouveau Avantage: Avec Bluetooth et 4 Go Carte TF
3. Bluetooth Distance: 2M-5M
4. Langues supportées: German,English,Spanish,French,Italian,Portuguese,Dutch,Polish,Romanian,Czech,
Dansk, Turkish, Greek, Hungarian, Norwegian, Russian, Serbian, Swedish, and so on. (If you can not find your language please contact our customer service. Because it keeps updating.)
5 Can work on Windows XP and Win7 systems
6 Work Cam for cars and trucks.
Free 7.With Keygen for activation.
2014 CDP Pro TcsCDP OBD2 Scanner + New Design
2014 New design TcsCDP CDP Pro + OBD2 Scanner is a tool newly released diagnosis for cars and trucks without bluetooth and without 4G TF card, easy to install and free activation.
Top 8 reasons to get a new TCS CDP:
1 Software version :. V2013.03
2 Wireless Bluetooth
3 Without 4G TF
4 Supported languages: English, Spanish, French, Italian, Portuguese, Czech, Dansk, German, Turkish, Greek, Dutch, Hungarian, Norwegian, Polish,
Romanian, Russian, Serbian, Swedish, and so on. (If you can not find your language please contact our customer service. Because it keeps updating.)
5 Can work on Windows XP and Win7 systems
6 Can work for cars and trucks.
7 With Keygen free for activation.
8 Cheaper Tcscdp PRO +

2014 Tcs CDP CDP Pro + 4G Memory Card 2014 With New Design
2014 New design TcsCDP CDP Pro + is a newly released tool for cars and trucks, with 4G memory card, easy to install and activation without diagnosis.
Top 7 reasons to get a new TCS CDP:
1.Software Version: V2013.03
2 Wireless Bluetooth
3 With 4G TF
4 Supported languages: English, Spanish, French, Italian, Portuguese, Czech, Dansk, German, Turkish, Greek, Dutch, Hungarian, Norwegian, Polish, Romanian, Russian, Serbian, Swedish, and so on. (If you can not find your language please contact our customer service. Because it keeps updating.)
5 Can work on Windows XP and Win7 systems
6 Can work for cars and trucks.
7 With Keygen free for activation.
obd2works.com -leader in OBD2 diagnostic tools on the French market, we offer products: auto diagnostic tools, obd2 scanners, OBD diagnostic tool for French car, diagnostic cable car diagnostic cable VAG automatic transponder chip, key program tool, car key replacement, change of automobile mileage, etc.