We are professional in the field of digital vehicle engineering ,and we focus on advancing the quality of our products all the time,now we have the new version V4.85 digiprog 3 ,this new version add more car models on the basic of V4.82.
Here are some details about Digiprog III Odometer Programmer V4.85.V4.85 supports following languages:Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
Besides,V4.85 Version Newly Added Vehicles:BMW:F20/F30;Citroen: C3/DS3 new versions; Dodge: Charger 24C16;VW: Diag new version;Fiat:Fiorino 95080/ECU95320;Ducato/Punto 95160; Landrover:Evoque 93C76;Mazda:3 C66;Mercedes:Crafter/Sprinter EZS new versions; Mitsubishi:Lancer new version; Nissan:Qashqai 2011 HCS12;370Z C86;Renault: Scenic 24c16+ABS.
Related PDF:Digprog 3 Obd Car List V4.82.pdf
Also,service interval adjustments and settings,assyst processing,fault memory read-erase,EEPROM programmer and Integrated PC communication are all the features of the new version V4.85.It deserves you to own one.
Here I want to give you some important tips for using Digiprog 3:
1.Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2.Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3.Always keep your Digiprog in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ,pls ensure that they are cleaned completely as the solvent can damage the clips.
If you want to know more details about the new version ,pls read our related PDF： Digiprog 3 Introduction.pdf
To buy digiprog 3,please visit:http://www.obd2works.com/digiprog-iii-v488-odometer-programmer-with-full-software-new-release-p-2035.html